📌
General Purpose I/O
How to Tune PWM1Func on ZombieVerter VCU
PWM output 1 function.
Quick Reference
Param ID
85
Unit
enum
Range
0 — 19
Default
0
Available Choices
0: None
(default)
1: ChaDeMo Allow
2: OBC Enable
3: Heater Enable
4: Run Indication
5: Warning Indication
6: Coolant Pump
7: Negative Contactor
8: Brake Light
9: Reverse Light
10: Brake Vac Pump
11: Cooling Fan
12: HV Active
13: Shift Lock NO
14: Preheat Out
15: PWM Tim3
16: CP Spoof
17: GS450 Pump
18: PWM Temp Gauge
19: PWM SOC Gauge
📖 What Does It Do?
PWM output 1 function.
🎯 Recommended Values
Default value: 0
Valid range: 0 to 19
Tune PWM1Func and All 80+ Parameters
Answer a few questions about your specific build and get a complete, validated config file ready to load.
Generate Your Complete Config →Free account • No credit card • Takes 5 minutes
🔗 Related Parameters
Other parameters in the General Purpose I/O category that work together with PWM1Func:
Out1Func
enumDigital output 1 function.
Out2Func
enumDigital output 2 function.
Out3Func
enumDigital output 3 function.
SL1Func
enumShift lock output 1.
SL2Func
enumShift lock output 2.
PWM2Func
enumPWM output 2 function.
PWM3Func
enumPWM output 3 function.
ppthresh
digProximity pilot ADC threshold.
BrkVacThresh
digBrake vacuum threshold.
BrkVacHyst
digBrake vacuum hysteresis.