Battery & HV
How to Tune tmphsmax on ZombieVerter VCU
Maximum heatsink temperature before power reduction.
📖 What Does It Do?
Maximum heatsink temperature before power reduction.
🎯 Recommended Values
Default value: 85
Valid range: 50 to 150
Tuning Strategy
Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.
💡 Tuning Tips
75-80°C conservative, 85°C default, 90-100°C with good cooling.
Check your inverter datasheet.
Tune tmphsmax and All 80+ Parameters
Answer a few questions about your specific build and get a complete, validated config file ready to load.
Generate Your Complete Config →Free account • No credit card • Takes 5 minutes
🔗 Related Parameters
Other parameters in the Battery & HV category that work together with tmphsmax:
udcmin
VMinimum DC voltage. Power is reduced below this.
udclim
VMaximum DC voltage during regen. Set to your pack's max charge voltage.
idcmax
AMaximum DC current draw (acceleration). Set to battery's max discharge rating.
idcmin
AMaximum DC regen current. Must be NEGATIVE for regen to work!
tmpmmax
°CMaximum motor temperature before power reduction.