How to Tune BattCap on ZombieVerter VCU

Total battery pack capacity.

Quick Reference

Param ID

Unit

kWh

Range

0.1 — 250

Default

🔍 See a sample config →

📖 What Does It Do?

Total battery pack capacity.

🎯 Recommended Values

Default value: 22

Valid range: 0.1 to 250

Tuning Strategy

Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.

💡 Tuning Tips

PACK_kWh = cell_Ah × nominal_voltage / 1000.

Example: 96 × 66Ah × 3.7V = 23.4 kWh.

Tune BattCap and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Charger Control category that work together with BattCap:

Voltspnt

Target charging voltage.

Pwrspnt

Target charging power.

IdcTerm

Charge termination current.

Chgctrl

enum

Charger control mode.

ChgAcVolt

Vac

AC mains voltage.

ChgEff

Charger efficiency.

ConfigFoccci

enum

Enable FOCCCI mode.

CCS_ILim

CCS current limit.

SOCFC

Fast charge SOC threshold.

CCS_ICmd

CCS fast charge current command.

← Back to All Guides Next: Chgctrl →