How to Tune Pwrspnt on ZombieVerter VCU

Target charging power.

Quick Reference

Param ID

Unit

Range

0 — 12000

Default

1500

🔍 See a sample config →

📖 What Does It Do?

Target charging power.

🎯 Recommended Values

Default value: 1500

Valid range: 0 to 12000

Tuning Strategy

Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.

💡 Tuning Tips

1500W = wall outlet. 3300W = Level 2. 6600W = fast Level 2.

Don't exceed charger's rating.

Tune Pwrspnt and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Charger Control category that work together with Pwrspnt:

Voltspnt

Target charging voltage.

IdcTerm

Charge termination current.

BattCap

kWh

Total battery pack capacity.

Chgctrl

enum

Charger control mode.

ChgAcVolt

Vac

AC mains voltage.

ChgEff

Charger efficiency.

ConfigFoccci

enum

Enable FOCCCI mode.

CCS_ILim

CCS current limit.

SOCFC

Fast charge SOC threshold.

CCS_ICmd

CCS fast charge current command.

← Back to All Guides Next: IdcTerm →