How to Tune Voltspnt on ZombieVerter VCU

Target charging voltage.

Quick Reference

Param ID

Unit

Range

0 — 1000

Default

395

🔍 See a sample config →

📖 What Does It Do?

Target charging voltage.

🎯 Recommended Values

Default value: 395

Valid range: 0 to 1000

Tuning Strategy

Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.

💡 Tuning Tips

Set to: series_cells × 4.1V. For 96s: ~394V.

Conservative = longer battery life.

Tune Voltspnt and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Charger Control category that work together with Voltspnt:

Pwrspnt

Target charging power.

IdcTerm

Charge termination current.

BattCap

kWh

Total battery pack capacity.

Chgctrl

enum

Charger control mode.

ChgAcVolt

Vac

AC mains voltage.

ChgEff

Charger efficiency.

ConfigFoccci

enum

Enable FOCCCI mode.

CCS_ILim

CCS current limit.

SOCFC

Fast charge SOC threshold.

CCS_ICmd

CCS fast charge current command.

← Back to All Guides Next: Pwrspnt →