All Guides › Throttle › pot2min
🦶

Throttle

How to Tune pot2min on ZombieVerter VCU

Second throttle channel MINIMUM (for dual-channel pedals). Leave at 4095 if unused.

Quick Reference

Param ID

9

Unit

dig

Range

0 — 4095

Default

4095

🔍 See a sample config →

📖 What Does It Do?

Second throttle channel MINIMUM (for dual-channel pedals). Leave at 4095 if unused.

🎯 Recommended Values

Default value: 4095

Valid range: 0 to 4095

Tuning Strategy

Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.

💡 Tuning Tips

⚠️ Even in SingleChannel mode, pot2 is still referenced! Set pot2min=4095, pot2max=4095 to disable.

For dual-channel pedals (VAG, some BMWs): measure the second channel at pedal released.

Tune pot2min and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Throttle category that work together with pot2min:

potmin

dig

Throttle pedal MINIMUM raw ADC value (pedal fully released).

potmax

dig

Throttle pedal MAXIMUM raw ADC value (pedal floored).

pot2max

dig

Second throttle channel MAXIMUM.

potmode

enum

Throttle input mode. Single = one pot. Dual = redundant channels for safety.

dirmode

enum

Direction control mode. How the VCU determines forward/reverse.

DirChange

enum

Restrict direction changes while moving (safety).

DirChangeRpm

rpm

RPM threshold for direction change restriction.

reversemotor

enum

Reverse motor rotation. Set to 1 if motor spins wrong way.

throtramp

%/10ms

Throttle ramp rate. How fast motor responds to pedal. Lower = smoother.

throtramprpm

rpm

RPM where throttle ramp reaches full effect.
← Back to All Guides Next: pot2max →