Throttle & Regen
How to Tune regentravel on ZombieVerter VCU
Throttle travel zone dedicated to regen (from 0% pedal).
📖 What Does It Do?
Throttle travel zone dedicated to regen (from 0% pedal).
🎯 Recommended Values
Default value: 30
Valid range: 0 to 100
Tuning Strategy
Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.
💡 Tuning Tips
30% = first 30% of pedal travel is regen zone, then acceleration.
Higher = more regen control range. Lower = quicker acceleration.
Tune regentravel and All 80+ Parameters
Answer a few questions about your specific build and get a complete, validated config file ready to load.
Generate Your Complete Config →Free account • No credit card • Takes 5 minutes
🔗 Related Parameters
Other parameters in the Throttle & Regen category that work together with regentravel:
ampmin
%Minimum amplitude/power at zero throttle. Prevents deadband.
brakeregen
%Regen amount when brake pedal is pressed.
regenrampstr
HzMotor frequency at which regen ramping starts.
offthrotregen
%Regen amount when throttle is fully released (off-throttle regen).
brklightout
%Regen level that triggers brake light output.
slipstart
%Slip percentage at which motor starts producing torque.
throtcur
A/%Current per percent throttle — this is your POWER control. Higher = more torque.
cruiseregen
%Regen applied during cruise control deceleration.