How to Tune canspeed on ZombieVerter VCU

CAN bus speed.

Quick Reference

Param ID

Unit

enum

Range

0 — 4

Default

🔍 See a sample config →

📖 What Does It Do?

CAN bus speed.

🎯 Recommended Values

Default value: 2

Valid range: 0 to 4

💡 Tuning Tips

0=125k, 1=250k, 2=500k (default), 3=800k, 4=1M.

Most inverters use 500k.

Tune canspeed and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Auxiliary category that work together with canspeed:

pwmgain

Aux PWM gain/scaling.

pwmofs

dig

Aux PWM offset.

speedkp

Speed control proportional gain.

idlespeed

rpm

Idle speed target. -100 = disabled.

speedflt

Speed measurement filter.

pwmfunc

enum

Auxiliary PWM output function.

cruisemode

enum

Cruise control mode.

idlethrotlim

Idle throttle limit. Prevents runaway.

idlemode

enum

Idle control mode.

tripmode

enum

Trip behavior on overcurrent/fault.

← Back to All Guides Next: tripmode →