How to Tune idlethrotlim on ZombieVerter VCU

Idle throttle limit. Prevents runaway.

Quick Reference

Param ID

Unit

Range

0 — 100

Default

🔍 See a sample config →

📖 What Does It Do?

Idle throttle limit. Prevents runaway.

🎯 Recommended Values

Default value: 50

Valid range: 0 to 100

Tuning Strategy

Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.

💡 Tuning Tips

50% = max half throttle during idle control.

Tune idlethrotlim and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Auxiliary category that work together with idlethrotlim:

pwmgain

Aux PWM gain/scaling.

pwmofs

dig

Aux PWM offset.

speedkp

Speed control proportional gain.

idlespeed

rpm

Idle speed target. -100 = disabled.

speedflt

Speed measurement filter.

pwmfunc

enum

Auxiliary PWM output function.

cruisemode

enum

Cruise control mode.

idlemode

enum

Idle control mode.

canspeed

enum

CAN bus speed.

tripmode

enum

Trip behavior on overcurrent/fault.

← Back to All Guides Next: idlemode →