How to Tune pwmofs on ZombieVerter VCU

Aux PWM offset.

Quick Reference

Param ID

Unit

dig

Range

-65535 — 65535

Default

🔍 See a sample config →

📖 What Does It Do?

Aux PWM offset.

🎯 Recommended Values

Default value: 0

Valid range: -65535 to 65535

Tuning Strategy

Start with the default value and adjust in small increments. Monitor vehicle behavior after each change before making further adjustments.

💡 Tuning Tips

Offsets the PWM output value.

Tune pwmofs and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Auxiliary category that work together with pwmofs:

pwmgain

Aux PWM gain/scaling.

speedkp

Speed control proportional gain.

idlespeed

rpm

Idle speed target. -100 = disabled.

speedflt

Speed measurement filter.

pwmfunc

enum

Auxiliary PWM output function.

cruisemode

enum

Cruise control mode.

idlethrotlim

Idle throttle limit. Prevents runaway.

idlemode

enum

Idle control mode.

canspeed

enum

CAN bus speed.

tripmode

enum

Trip behavior on overcurrent/fault.

← Back to All Guides Next: speedkp →