How to Tune pwmfunc on ZombieVerter VCU

Auxiliary PWM output function.

Quick Reference

Param ID

Unit

enum

Range

0 — 3

Default

🔍 See a sample config →

📖 What Does It Do?

Auxiliary PWM output function.

🎯 Recommended Values

Default value: 0

Valid range: 0 to 3

💡 Tuning Tips

0=Off, 1=Speed, 2=Current, 3=Temperature

Tune pwmfunc and All 80+ Parameters

Answer a few questions about your specific build and get a complete, validated config file ready to load.

Generate Your Complete Config →

Free account • No credit card • Takes 5 minutes

🔗 Related Parameters

Other parameters in the Auxiliary category that work together with pwmfunc:

pwmgain

Aux PWM gain/scaling.

pwmofs

dig

Aux PWM offset.

speedkp

Speed control proportional gain.

idlespeed

rpm

Idle speed target. -100 = disabled.

speedflt

Speed measurement filter.

cruisemode

enum

Cruise control mode.

idlethrotlim

Idle throttle limit. Prevents runaway.

idlemode

enum

Idle control mode.

canspeed

enum

CAN bus speed.

tripmode

enum

Trip behavior on overcurrent/fault.

← Back to All Guides Next: cruisemode →